2 x legs: 2,53 x 2,53 x 78,0 inches long (6,56 foot)
2 x supporter for the legs: 2,14 x 2,75 x 27,55 inches long (2,29 foot)
2 x feet: 8,66 width x 0,78 inches thick x 23,62 inches long (1,96 foot)
1 x chalkboard 3,28 foot width x 0,6 inches thick x 4,59 foot long
Inside frame left and right sides same size:
2 x 1,95 width x 0,58 inches thick x 39,0 inches long (3,78 foot)
1 x 3,28 width x 0,6 inches thick x 44,0 inches long (3,7 foot)
1 x top board: 2,9 width x 0,97 inches thick x 55,1 inches long (4,59 foot)
1 x chalk shelf same size as the lower inside frame
4 hinges for the supporter of the legs
1 extra supporter for the legs (shown later)
About 50 – 60 flat screws 0,78 inches long
2 big screw bolts 0,39 inches width and 3,93 inches long
Cut the supporter for the legs.
Size: 2,14 x 2,75 x 27,5 inches long (2,29 foot)
The upper angle is about 45 degrees and the and the bottom angle is about half 22 – 30 degrees.
It’s easy to estimate the bottom angle If You put the upper angel towards the legs when You have
The legs needs some more support. This is a suggestion which fits very well. I don’t know what the
name of it is or for what purpose it was made, but it worked very well.
You can see the feet with its supporter to the legs. The hinges which I used have the same width
as the supporter. A good idea to make the legs more sturdy is to put two screws into the
legs insert from the bottom under the feet.
Feet size: 8,66 width x 0,78 inches thick x 23,62 inches long (1,96 foot)
Here is the frame placed back of the board. Observe the empty space between the right side
and the lower frame.This space is for the right leg so it they can tight closed to the chalkboard. Also
notice that there is no frame on the top of the board. This space is for the top board to connect to
Frame, left and right side:
2,19 width x 0,58 inches thick x 39 inches long (3,78 foot)
3,28 width x 0,6 inches thick x 44,0L inches long (3,7 foot)
This picture shows the right side frame. Observe the leg which is on the inside of the frame.
Make holes for the screw bolts which holds the top board on the legs.
The board fastened with the top board and the big screw bolts.
The topboard without the chalk board. Make sure that the top board is placed correct on the top of
Top board size: 2,9 width x 0,97 inches thick x 55,1 inches long (4,59 foot)
This picture shows the top board connected to the chalk board. The legs are tight to the chalkboard
and goes in the space between the right and lower frame.
The simple easel is ready to use! I’v put a small shelf for the chalks at the bottom of the chalk board
with the same size as the lower frame side: 3,28 width x 0,97 inches thick x L44 inches long (4,59 foot).